企業中應用的流水線設備種類繁多：大致可分為皮帶流水線、滾筒流水線、不鏽鋼鏈板線、網帶輸送機、裝配流水線、流水線插件線、流水線工作台等流水線設備，今天我們重點講解關於流水線插件線的技術要求：
流水線生產線插件線的組合及配置可任意變化，每台機長為3M，2.4M兩種可隨時變更，組成及配置，插件線速度可用變速旋鈕調整所需輸送速度，寬度可與電路板寬度隨時高速，機身由鋁合金構成，操作搖杆可輕易調整插件寬度30-320mm，基板與插件線接觸麵隻有2.5mm。
流水線插件線線體配置
流水線插件線結構美觀，輕巧方便，實用性強，靈活組合。通常每2米或2.4米為一基本單元進行傳動或調寬，專用鋁合金導軌，靠近操作麵一邊導軌固定，另一邊可移動，並通常放置料盒架，保證操作每一次拾取元件距離最小，提高生產效率，常規適用基板寬度50-300MM。
1.流水線線體配置：日光燈；電風扇；工藝圖板；工具箱配有電源插座(正規電源是110V，因為考慮到人身安全，所以在現在的自動化流水線體上都會采用到110V電壓供電) ；搖杆；元件盒；EM操作手冊說明書架。線體高度為2M，其中工作麵高度可調；線體長度根據產品的裝配工藝編排計算得出。
2.流水線線體結構設計美觀大方，機架采用模具生產，一致性好，矩形管、板材選用優質標準材料，采用噴塑工藝。整條線充分體現現代電子廠自動化生產特征。線體由若幹個標準型2米單元組成。每個單元為相對獨立的整體，工作高度720~760可調，照明采用30W直管熒光。
3.安裝調整心托輥組：有多種類型如中心轉軸式、四連杆式、立輥式等，其原理是采用阻擋或托輥在水平麵內方向轉動 ，阻擋或產生橫向推力使皮帶主動向心，達到調整皮帶跑偏的目的。平常在流水線設備總長度較短時或流水線設備雙向運 行時采用此方法比較合理，緣故原由是較短流水線設備更容易跑偏並且不容易調整。
4.調整承載托輥組。流水線的皮帶在整個皮帶輸送機的中部跑偏時可調整托輥組的位置來調整跑偏;在製造時托輥組的兩側安裝孔都加工成長孔，以便進行調整。詳細方法是皮帶偏向哪一側，托輥組的哪一側朝皮帶前進方向前移濰坊設計，或另外一側後移。
以上內容由溫嶺市91网站入口生產流水線製造廠整理提供。91网站入口生產流水線是一家專業生產、設計、安裝、調試、運輸、維護為一體的流水線設備企業。建廠26年來，憑著先進的現代化生產管理體係，產品不斷創新，製造出成套懸掛物件輸送線，各類皮帶式輸送線、塗裝線、板鏈線、整機線、清洗線、自動化組合裝配生產設備，倉儲等產品係列。產品廣泛應用於汽車、摩托車、電動自行車及配件、清洗機、汽油機、縫糿機、電機、儀器儀表、家用電器、電腦、彩電、空調器、電冰箱、洗衣機、炊具、節能機、化妝品、通信、交通、水泵、食品塑料製品等電子行業各種裝配生產,為企業生產提高效率，降低人力成本。熱忱歡迎新老客戶來廠參觀、洽談合作！
There are many types of assembly line equipment used in enterprises: it can be roughly divided into belt assembly lines, drum assembly lines, stainless steel chain plate lines, mesh belt conveyors, assembly lines, assembly line plug-in lines, assembly line workbenches and other assembly line equipment. Today we will focus on the assembly line plug-ins Technical requirements of the line:
The combination and configuration of the plug-in line of the assembly line production line can be changed arbitrarily. The length of each machine is 3M and 2.4M. The composition and configuration can be changed at any time. The linear speed of the plug-in can be adjusted by the variable speed knob. The width can be adjusted to the width of the circuit board at any time. High-speed, the body is made of aluminum alloy, the operating rocker can easily adjust the width of the plug-in 30-320mm, and the contact surface between the substrate and the plug-in line is only 2.5mm.
Assembly line plug-in line body configuration
The assembly line plug-in line has beautiful structure, light weight and convenience, strong practicability, and flexible combination. Usually every 2 meters or 2.4 meters is a basic unit for transmission or width adjustment. Special aluminum alloy guide rails are fixed on one side of the guide rail close to the operation surface, and the other side can be moved. The material box rack is usually placed to ensure that the distance between picking components is minimized during each operation. Improve production efficiency, conventionally suitable for substrate width 50-300MM.
1. Assembly line body configuration: fluorescent lamp; electric fan; process drawing board; tool box is equipped with a power socket (the regular power supply is 110V, because personal safety is considered, so the current automatic assembly line body will use 110V voltage power supply); Rocker; component box; EM operation manual instruction holder. The height of the line body is 2M, in which the height of the working surface is adjustable; the length of the line body is calculated according to the assembly process of the product.
2. The assembly line body structure is beautiful and generous, the frame is produced by molds, and the consistency is good. The rectangular tubes and plates are made of high-quality standard materials and sprayed. The entire line fully embodies the characteristics of automated production in modern electronics factories. The line body is composed of several standard 2-meter units. Each unit is a relatively independent whole, the working height is adjustable from 720 to 760, and the lighting adopts 30W straight tube fluorescence.
3. Installation and adjustment of the core roller group: There are many types such as central shaft type, four-link type, vertical roller type, etc. The principle is to use blocking or rollers to rotate in the horizontal plane, blocking or generating lateral thrust to make the belt active Centripetal to achieve the purpose of adjusting belt deviation. It is usually reasonable to use this method when the total length of the assembly line equipment is short or when the assembly line equipment is in two-way operation. The reason is that the shorter assembly line equipment is more prone to deviation and difficult to adjust.
4. Adjust the bearing roller group. When the belt of the assembly line deviates in the middle of the entire belt conveyor, the position of the roller group can be adjusted to adjust the deviation; during manufacturing, the mounting holes on both sides of the roller group are processed with long holes for adjustment. The detailed method is which side of the belt is biased, which side of the roller set is moved forward in the direction of belt advancement, or the other side is moved backward.
The above content is organized and provided by Wenling Huayu Production Line Manufacturing Plant. Huayu production line is a professional production, design, installation, commissioning, transportation and maintenance line equipment enterprise. Since the establishment of the factory 26 years ago, with the advanced modern production management system and continuous product innovation, a complete set of suspended object conveyor lines, various belt conveyor lines, coating lines, plate chain lines, complete machine lines, cleaning lines, and automated combinations have been manufactured. Assemble production equipment, storage and other product series. Products are widely used in automobiless, motorcycles, electric bicycles and accessories, washing machines, gasoline engines, sewing machines, motors, instruments, household appliances, computers, color TVs, air conditioners, refrigerators, washing machines, cooking utensils, energy-saving machines, cosmetics, Various assembly and production of electronic industries such as communications, transportation, water pumps, food plastic products, etc., improve production efficiency and reduce labor costs for enterprises. Warmly welcome new and old customers to visit the factory and discuss cooperation!
